This thin plate corrugated roofing tile machine is different from the ordinary corrugated roofing sheet machine:
First, the prices are different. An ordinary corrugated sheet machine costs about 5,000 USD, while the price of our machine exceeds 50,000 USD.
Secondly, the thickness of the raw materials of the machine is only 0.15 millimeters.

In the past, such thin materials were all produced by horizontal wave roof sheet machine . First,materials were uncoiled, then cut into fixed lengths, and finally fed in, formed and stacked manually.
Now, for our equipment, the entire process is completed automatically. During the operation of the equipment, only one person is needed to assist in the operation. Unlike the traditional circular arc machine for thin plates, it does not require ‎five or six ‎ people to operate.
Moreover, the shapes produced by our company's wave roof sheet machine are arc-shaped, while the arcs produced by the traditional machine are close to triangles.
How did we achieve this effect?
In fact, we adopted the technologies from Europe and America. First, we used the linear segment technology to break the internal stress of the sheet through linear segments.Then, by combining the tangent points and corners of the arc, an arc effect can be achieved.
Our electronic control system fully adopts the configuration of Siemens. Combined with remote operation and maintenance technology, the program and data collection of this equipment can all be operated and completed remotely. All the components are made of Siemens and comply with the CSA and UL certifications in North America.
In order to maintain the high-speed operation and cutting of the equipment, our equipment adopts Siemens motors.In order to cut off and return quickly, an accumulator was installed.In order to maintain a constant oil temperature, air-cooling equipment was installed.To ensure that the equipment does not stop during high-speed operation, we adopt servo tracking cutting, the speed of our device can reach 50 meters per minute.Some customers require a relatively short cutting length. To ensure that the equipment does not get stuck, we use a two-section and six-meter-long conveyor belt to convey the products at high speed.
There are many types of automatic stacking machines that adopt relatively traditional methods. Their speed can reach 30 to 40 meters per minute,but they are suitable for long panels.However, our equipment also needs to meet the palletizing requirements of the short boards. Therefore, pneumatic drive is adopted, which enables rapid opening and closing and quick blanking.
At present, the demand for this type of equipment and this type of board is very high in Africa and South America. If you require raw material thickness is thin,or require equipment fast, you can contact us, we will give you a perfect solution.